Technical Info

» Chemical properties of Stainless Steel

» Specification of Carbon Steel

» Specification of Alloy Steel Pipes

» Chemical properties of Nickel alloys

» Product Specification of Nickel Alloys

» (ASTM) standards for stainless steels for general applications

» Copper Alloys

» Pipe Data

» Buttweld Fittings

» Socketweld Fittings

» flange Dimensions ANSI B-16.5

» flange Dimensions BS10

» flange Dimensions BS4504 PN 16

Chemical properties of Stainless Steel

Chemical compositions of AISI (ASTM/ASME) and UNS austenitic stainless steel grades
The data given is not intended to replace that shown in individual standards to which reference should always be made.

Standard 300 series austenitic grades
Designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S30100 30301 301 0.15 1.00 2.00 0.045 0.030 16.0/18.0 - 6.00/8.00 N 0.10
S30103 - 301L 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.00/8.00 N 0.20
S30153 - 301LN 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.00/8.00 N 0.07/0.20
S30200 30302 302 0.15 0.75 2.00 0.045 0.030 17.0/19.0 - 8.00/10.0 -
S30215 30302B 302B 0.15 2.00/3.00 2.00 0.045 0.030 17.0/19.0 - 8.00/10.0 -
S30300 30303 303 0.15 1.00 2.00 0.20 0.15 min 17.0/19.0 0.60 8.00/10.0 Zr 0.60
S30310 - XM-5 (303Plus x) 0.15 1.00 2.50/4.50 0.20 0.25 min 17.00/19.00 - 7.00/9.00 -
S30323 30303Se 303Se 0.15 1.00 2.00 0.20 0.060 17.0/19.0 - 8.00/10.0 Se 0.15 min
S30330 - 303Cu 0.15 1.00 2.00 0.15 0.10 min 17.00/19.00 - 6.00/10.00 Cu 2.5/4.00; Se 0.10
S30400 30304 304 0.08 0.75 2.00 0.045 0.030 18.0/20.0 - 8.00/10.5 -
S30403 30304L 304L 0.03 0.75 2.00 0.045 0.030 18.0/20.0 - 8.00/12.0 -
S30430 - 302HQ 0.03 1.00 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 Cu 3.0/4.0
S30452 - XM-21 (304HN) 0.08 1.00 2.00 0.045 0.030 18.0/20.0 - 8.00/10.00 N 0.16/0.30
S30453 - 304LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 - 8.00/12.0 N 0.10/0.16
S30454 - - 0.03 1.00 2.00 0.045 0.030 18.0/20.0 - 8.0/11.0 N 0.16/0.30
S30500 30305 305 0.12 1.00 2.00 0.045 0.030 17.0/19.0 - 10.5/13.0 -
S30800 30308 308 0.08 1.00 2.00 0.045 0.030 19.0/21.0 - 10.0/12.0 -
S31600 30316 316 0.08 1.00 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 -
S31603 30316L 316L 0.03 1.00 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 -
S31635 - 316Ti 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 Ti 5x (C+N) / 0.70
S31640 - 316Cb 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 Nb 10x C / 1.10
S31653 - 316LN 0.03 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10/0.16
S31700 30317 317 0.08 1.00 2.00 0.045 0.030 18.0/20.0 3.00/4.00 11.0/15.0 -
S31703 - 317L 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.00/4.00 11.0/15.0 N 0.10
S31725 - 317LM 0.030 0.75 2.00 0.045 0.030 18.0/20.0 4.0/5.0 13.5/17.5 N 0.20
S31726 - 317LMN 0.030 0.75 2.00 0.045 0.030 17.0/20.0 4.0/5.0 13.5/17.5 N 0.10/0.20
S31753 - 317LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.0/4.0 11.0/15.0 N 0.10/0.20
S32100 30321 321 0.08 1.00 2.00 0.045 0.030 17.0/19.0 - 9.00/12.0 5 Ti 5 x C min
S34700 30347 347 0.08 1.00 2.00 0.045 0.030 17.0/19.0 - 9.00/13.0 Nb+Ta 10 x C min
S34720 - 347F 0.08 1.00 2.00 0.040 0.18/0.35 17.00/19.00 0.75 9.00/12.00 Nb 10xC / 1.10; Cu 0.75; Ta 0.05
S34723 - 347FSe 0.08 1.00 2.00 0.11/0.17 0.030 17.00/19.00 0.75 9.00/12.00 Nb 10xC / 1.10; Cu 0.75; Se 0.15/0.35; Ta 0.05
S34800 30348 348 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.00/13.0 Nb+Ta 10 x C / 1.00; Ta:0.10 max; Co 0.20
S38400 30384 384 0.08 1.00 2.00 0.045 0.030 15.0/17.0 - 17.0/19.0 -

Standard 200 series austenitic grades
Designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S20100 30201 201 0.15 1.00 5.50/7.50 0.060 0.030 16.0/18.0 - 3.50/5.50 N 0.25
S20103 - - 0.03 0.75 5.5/7.5 0.045 0.030 16.0/18.0 - 3.5/5.5 N 0.25
S20153 - - 0.03 0.75 6.4/7.5 0.045 0.015 16.0/17.5 - 4.0/5.0 N 0.10/0.25; Cu 1.00
S20161 - Gall-Tough 0.15 3.0/4.0 4.0/6.0 0.040 0.040 15.0/18.0 - 4.0/6.0 N 0.08/0.20
S20162 - - 0.15 2.5/4.5 4.0/8.0 0.040 0.040 16.5/21.0 0.05/0.25 6.0/10.0 N 0.05/0.25
S20200 30202 202 0.15 1.00 7.50/10.0 0.060 0.030 17.0/19.0 - 4.00/6.00 N 0.25
S20300 - XM-1 (203EZ) 0.08 1.00 5.0/6.5 0.045 0.18/0.35 16.0/18.0 - 5.0/6.5 Cu 1.75/2.25
S20400 - - 0.030 1.00 7.0/9.0 0.040 0.030 15.0/17.0 - 1.50/3.00 N 0.15/0.30
S20500 - 205 0.12/0.25 1.00 14.0/15.5 0.060 0.030 16.5/18.0 - 1.0/1.7 N 0.32/0.40
S20910 - XM-19 (Nitronic 50) 0.06 0.75 4.0/6.0 0.040 0.030 20.5/23.5 1.50/3.00 11.5/13.5 Nb 0.10/0.30; V 0.10/0.30
S21400 - XM-31 (Tenelon) 0.12 0.30/1.00 14.0/16.0 0.045 0.030 17.0/18.5 - 1.00 -
S21460 - XM-14 0.12 0.75 14.0/16.0 0.060 0.030 17.0/19.0 - 5.0/6.0 N 0.35/0.50
S21600 - XM-17 (216) 0.08 0.75 7.5/9.0 0.045 0.030 17.5/22.0 2.00/3.00 5.0/7.0 N 0.25/0.50
S21603 - XM-18 (216L) 0.03 0.75 7.5/9.0 0.045 0.030 17.5/22.0 2.00/3.00 5.0/7.0 N 0.25/0.50
S21800 - Nitronic 60 0.10 3.5/4.5 7.0/9.0 0.060 0.030 16.0/18.0 - 8.0/9.0 N 0.08/0.18
S21900 - 21-6-9 (Nitronic 40) 0.08 1.00 8.00/10.00 0.045 0.030 19.0/21.50 - 5.50/7.50 N 0.15/0.40
S21904 - XM-11 (Nitronic 40) 0.04 1.00 8.00/10.00 0.045 0.030 19.00/21.50 - 5.50/7.50 N 0.15/0.40
S24000 - XM-29 (Nitronic 33) 0.08 0.75 11.5/14.5 0.060 0.030 17.0/19.0 - 2.3/3.7 N 0.20/0.40
S24100 - 18-2Mn (Nitronic 32) 0.15 1.00 11.0/14.0 0.045 0.030 16.5/19.00 - 0.50/2.50 N 0.20/0.45
S28200 - 18-18 Plus 0.15 1.00 17.00/19.00 0.045 0.030 17.00/19.00 0.75/1.25 - N 0.40/0.60; Cu 0.75/1.25

Special austenitic grades
Designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
N08020 - 20Cb-3 0.07 1.00 2.00 0.045 0.035 19.0/21.0 2.00/3.00 32.0/38.0 Cu 3.0/4.0; Nb 8xC / 1.00
N08024 - 20Mo-4 0.03 0.50 1.00 0.035 0.035 22.50/25.00 3.50/5.00 35.00/40.00 Cu 0.50/1.50; Nb+Ta 0.15/0.35
N08026 - 20Mo6 0.03 0.50 1.00 0.03 0.03 22.00/26.00 5.00/6.70 33.0/37.20 Cu 2.00/4.00; N 0.10/0.16
N08028 - Sanicro28 0.030 1.0 2.50 0.030 0.030 26.0/28.0 3.0/4.0 30.0/34.0 Cu 0.6/1.4
N08366 - AL-6X 0.035 1.00 2.00 0.040 0.030 20.00/22.00 6.00/7.00 23.50/25.50 -
N08367 - AL-6XN 0.030 1.00 2.00 0.040 0.030 20.0/22.0 6.0/7.0 23.5/25.5 Cu 0.75; N 0.18/0.25
N08700 - JS700 0.04 1.00 2.00 0.040 0.030 19.0/23.0 4.3/5.0 24.0/26.0 Cu 0.50; Nb 8xC / 0.40
N08904 - 904L 0.020 1.00 2.00 0.045 0.035 19.0/23.0 4.0/5.0 23.0/28.0 Cu 1.0/2.0
N08925 - 1925hMo 0.020 0.50 1.0 0.045 0.030 19.0/21.0 6.0/7.0 24.0/26.0 Cu 0.8/1.5; N 0.1/0.2
N08926 - - 0.020 1.50 2.00 0.030 0.010 19.0/21.0 6.0/7.0 24.0/26.0 Cu 0.5/1.5; N 0.15/0.25
S30600 - Cronifer 1815 LCSi 0.018 3.7/4.3 2.00 0.020 0.020 17.0/18.5 0.20 14.0/15.5 Cu 0.50
S30601 - - 0.015 5.0/5.6 0.50/0.80 0.030 0.013 17.0/18.0 0.20 17.0/18.0 Cu 0.05; N 0.35
S31050 - 310MoLN 0.020 0.50 2.00 0.030 0.010 24.0/26.0 1.60/2.60 0.09/0.15 N 0.09/0.15
S31254 - 254SMO 0.020 0.80 1.00 0.030 0.010 19.5/20.5 6.0/6.5 17.5/18.5 Cu 0.50/1.00; N 0.18/0.22
S31266 - - 0.030 1.00 2.0/4.0 0.035 0.020 23.0/25.0 5.2/6.2 21.0/24.0 Cu 1.00/2.50; N 0.35/0.60; W 1.50/2.50
S31277 - - 0.020 0.50 3.00 0.030 0.010 20.5/23.0 6.5/8.0 26.0/28.0 Cu 0.5/1.50; N 0.30/0.40
S32050 - - 0.030 1.00 1.50 0.035 0.020 22.0/24.0 6.0/6.8 20.0/23.0 Cu 0.40
S32615 - - 0.07 4.8/6.0 2.00 0.045 0.030 16.5/19.5 0.30/1.50 19.0/22.0 Cu 1.50/2.50
S32654 - 654SMO 0.020 0.50 2.0/4.0 0.030 0.005 24.0/25.0 7.0/8.0 21.0/23.0 Cu 0.30/0.60; N 0.45/0.55
S34565 - Nirosta 4565S 0.030 1.00 5.0/7.0 0.030 0.010 23.0/25.0 4.0/5.0 16.0/18.0 N 0.40/0.60; Nb 10x C / 1.00
S35135 - - 0.08 0.60/1.00 1.00 0.045 0.015 20.0/25.0 4.0/4.8 30./38.0 Ti 0.40/1.00
S38100 - XM-15 (18-18-2) 0.08 1.50/2.50 2.00 0.030 0.030 17.0/19.0 - 17.5/18.5 -
S38815 - - 0.030 5.5/6.5 2.00 0.040 0.020 13.0/15.0 0.75/1.50 13.0/17.0 Cu 0.75/1.50; Al 0.30

Chemical compositions of AISI (ASTM/ASME) and UNS ferritic stainless steel grades
Designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S18200 - XM-34 (18-2FM) 0.08 1.00 2.50 0.04 0.15 min 17.5/19.5 1.50/2.50 - -
S18235 - - 0.025 1.00 0.50 0.030 0.15/0.35 17.5/18.5 2.00/2.50 1.00 N 0.025; (C+N) 0.035; Ti 0.30/1.00
S40300 51403 403 0.15 0.50 1.00 0.040 0.030 11.5/13.0 - - -
S40500 51405 405 0.08 1.00 1.00 0.040 0.030 11.5/14.5 - - Al 0.10./0.30
S40800 - - 0.08 1.00 1.00 0.045 0.045 11.5/13.0 - 0.50 Ti 12xC/1.10
S40900 51409 409 0.08 1.00 1.00 0.045 0.045 10.5/11.75 - 0.50 Ti 6xC/0.75
S40910 - - 0.030 1.00 1.00 0.040 0.020 10.5/11.7 - 0.50 N 0.030; Ti: 6x(C+N)/0.50; Nb 0.17
S40920 - - 0.030 1.00 1.00 0.040 0.020 10.5/11.7 - 0.50 N 0.030; Ti 0.15/0.50; Nb 0.10
S40930 - - 0.030 1.00 1.00 0.040 0.020 10.5/11.7 - 0.50 N 0.030; (Ti+Nb) [0.08+8x(C+N)]/0.75; Ti 0.05
S40945 - - 0.030 1.00 1.00 0.040 0.030 10.5/11.7 - 0.50 N 0.030; Ti 0.05/0.20; Nb 0.18/0.40
S40975 - - 0.030 1.00 1.00 0.040 0.030 10.5/11.7 - 0.50/1.00 N 0.030; Ti: 6x(C+N)/0.75
S40976 - - 0.030 1.00 1.00 0.040 0.030 10.5/11.7 - 0.75/1.00 N 0.040; Nb 10x(C+N)-0.80
S40977 - - 0.030 1.00 1.00 0.040 0.015 10.5/12.5 - 0.30/1.00 N 0.030
S41003 - - 0.030 1.00 1.50 0.040 0.030 10.5/12.5 - 1.50 -
S41008 - 410S 0.08 1.00 1.00 0.040 0.030 11.5/13.5 - - -
S41045 - - 0.030 1.00 1.00 0.040 0.030 12.0/13.0 - 0.50 N 0.030; Nb 9x(C+N)/0.60
S41050 - - 0.04 1.00 1.00 0.040 0.030 10.5/12.5 - 0.60/1.10 N 0.10
S41500 - - 0.05 0.60 0.50/1.00 0.030 0.030 11.5/14.0 0.50/1.00 3.5/5.5 -
S41603 - - 0.08 1.00 1.25 006 0.15min 12.0/14.0 - - -
S42035 - - 0.08 1.00 1.00 0.045 0.030 13.5/15.5 0.2/1.2 - Ti 0.30/0.50
S43000 51430 430 0.12 1.00 1.00 0.040 0.030 16.0/18.0 - - -
S43020 51430F 430F 0.12 1.00 1.25 0.060 0.15 min 16.0/18.0 0.60 - -
S43023 51430FSe 430FSe 0.12 1.00 1.25 0.060 0.060 16.0/18.0 - - Se 0.15
S43036 - 430Ti 0.10 1.00 1.00 0.040 0.030 16.00/19.50 - 0.75 Ti 5xC/0.75
S43400 51434 434 0.08 1.00 1.00 0.040 0.030 16.0/18.0 0.75/1.25 - -
S43600 51436 436 0.08 1.00 1.00 0.040 0.030 16.0/18.0 0.75/1.25 - Nb+Ta 5xC/0.70
S44200 51442 442 0.20 1.00 1.00 0.040 0.035 18.0/23.0 - - -

Special ferritic grades
Designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S32803 - Cronifer 2803Mo 0.015 0.55 0.50 0.020 0.0035 28.0/29.0 1.80/2.50 3.0/4.0 N 0.020; (C+N) 0.030; Nb 0.15/0.50
S43035 - 435 0.030 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 Ti [0.20+4(C+N)] / 1.10; Al 0.15
S43900 51439 439 0.07 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 Ti [0.20+4(C+N)] / 1.10; Al 0.15; N:0.04
S43903 51439LL 439LL 0.014 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 Ti [0.20+4(C+N)] / 1.10; Al 0.15; N:0.04
S43932 - - 0.030 1.00 1.00 0.040 0.030 17.0/19.0 - 0.50 N 0.030; (Ti+Nb) [0.20+4(C+N)] / 0.75; Al 0.15
S43940 - - 0.030 1.00 1.00 0.040 0.015 17.5/18.5 - 0.50 Ti 0.10/0.60; Nb [0.30+(3xC)] min
S44400 - 444 18Cr-2Mo 0.025 1.00 1.00 0.040 0.030 17.5/19.5 1.75/2.50 1.00 N 0.035; (Ti+Nb)[0.20+4(C+N)] / 0.80
S44500 - - 0.020 1.00 1.00 0.040 0.012 19.0/21.0 - 0.60 N 0.03; Cu 0.30/0.60; Nb 10x(C+N) / 0.80
S44626 - XM-33 (26-1Ti) 0.06 0.75 0.75 0.040 0.020 25.0/27.0 0.75/1.50 0.50 N 0.04; Cu 0.20; Ti 0.20/1.00
S44627 - XM-27 0.010 0.40 0.40 0.020 0.020 25.0/27.0 0.75/1.50 0.50 N 0.015; Cu 0.20; Nb 0.05/0.20; (Ni+Cu) 0.50
S44635 - Nu Monit (25-4-4) 0.025 0.75 1.00 0.040 0.030 24.5/26.0 3.5/4.5 3.5/4.5 N 0.035; (Ti+Nb){0.20+4(C+N)] / 0.80
S44660 - Sea-cure (26-3-3) 0.030 1.00 1.00 0.040 0.030 25.0/28.0 3.0/4.0 1.0/3.5 N 0.040; (Ti+Nb)0.20 / 1.00; (Ti+Nb) [6x(C+N)] min
S44700 - 29-4 0.010 0.20 0.30 0.025 0.020 28.0/30.0 3.5/4.2 0.15 N 0.020; Cu 0.15; (C+N) 0.025
S44735 - - 0.030 1.00 1.00 0.040 0.030 28.0/30.0 3.6/4.2 1.00 N 0.045; (Ti+Nb)0.20/1.00; (Ti+Nb) 6x (C+N) min
S44800 - 29-4-2 0.010 0.20 0.30 0.025 0.020 28.0/30.0 3.5/4.2 2.00/2.50 N 0.020; Cu 0.15; (C+N) 0.025
S46800 - - 0.030 1.00 1.00 0.040 0.030 18.0/20.0 - 0.50 N 0.030; Ti 0.07/0.30; Nb 0.10/0.60; (Ti+Nb) [0.20+4(C+N)] / 0.80

Chemical compositions of AISI (ASTM/ASME) and UNS heat resisting stainless steel grades
Designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S21500 - Esshete 1250 0.06/0.15 0.20/1.0 5.50/7.0 0.045 0.030 14.0/16.0 0.80/1.20 9.00/11.0 B 0.003/0.009; Nb 0.75/1.25; V 0.15/0.40
S30409 - 304H 0.04/0.10 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/10.5 -
S30415 - 153MA 0.04/0.06 1.00/2.00 0.80 0.045 0.030 18.0/19.0 - 9.0/10.0 N 0.12/0.18; Ce 0.03/0.08
S30451 - 304N 0.08 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/10.5 N 0.10/0.16
S30452 - 304HN (XM-21) 0.08 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/10.5 N 0.16/0.30
S30615 - RA85H 0.16/0.24 3.2/4.0 2.00 0.030 0.030 17.0/19.5 - 13.5/16.0 Al 0.80/1.50
S30815 - 253MA 0.05/0.10 1.40/2.00 0.80 0.040 0.030 20.0/22.0 - 10.0/12.0 N 0.14/0.20; Ce 0.03/0.08
S30900 30309 309 0.20 1.00 2.00 0.045 0.030 22.0/24.0 - 12.0/15.0 -
S30908 30309S 309S 0.08 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/15.0 -
S30909 - 309H 0.04/0.10 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/15.0 -
S30940 - 309Cb 0.08 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/16.0 Nb 10xC / 1.10
S30941 - 309HCb 0.04/0.10 0.75 2.00 0.045 0.030 22.0/24.0 - 12.0/16.0 Nb 10xC / 1.10
S31000 30310 310 0.25 1.50 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 -
S31008 30310S 310S 0.08 1.50 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 -
S31009 - 310H 0.04/0.10 0.75 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 -
S31040 - 310Cb 0.08 1.50 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 Nb 10xC / 1.10
S31041 - 310HCb 0.04/0.10 0.75 2.00 0.045 0.030 24.0/26.0 - 19.0/22.0 Nb 10xC / 1.10
S31400 30314 314 0.25 1.50/3.00 2.00 0.045 0.030 23.0/26.0 - 19.0/22.0 -
S31609 - 316H 0.04/0.10 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 -
S31651 - 316N 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10/0.16
S32109 - 321H 0.04/0.10 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/12.0 Ti 4x(C+N) / 0.70
S33228 - - 0.04/0.08 0.30 1.00 0.020 0.015 26.0/28.0 - 31.0/33.0 Al 0.025;Ce 0.05/0.10; Nb 0.6/1.0
S33400 - 334 0.08 1.00 1.00 0.030 0.015 18.0/22.0 - 19.0/21.0 Al 0.15/0.60; Ti 0.15/0.60
S34709 - 347H 0.04/0.10 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb 8xC /1.00
S34800 - 348 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb+Ta 10xC / 1.00; Ta 0.10; Co 0.20
S34809 - 348H 0.04/0.10 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0 Nb+Ta 10xC /1.00; Ta 0.10; Co 0.20
S35045 - - 0.06/0.10 1.00 1.50 0.045 0.015 25.0/29.0 - 32.0/37.0 Al 0.15/0.60; Ti 0.15/0.60
S35315 - 353MA 0.04/0.08 1.20/2.00 2.00 0.040 0.030 24.0/26.0 - 34.0/36.0 N 0.12/0.18; Ce 0.03/0.10
S41041 - - 0.13/0.18 0.50 0.40/0.60 0.030 0.030 11.50/13.00 0.20 0.50 Al 0.05; Nb 0.15
S41425 - - 0.05 0.50 0.50/1.00 0.020 0.005 12.0/15.0 1.50/2.00 4.0/7.0 N 0.06/0.12; Cu 0.30
S41800 - Greek Ascoloy (615) 0.15/0.20 0.50 0.50 0.040 0.030 12.00/14.00 0.50 1.80/2.20 W 2.50/3.50
S42200 - 616 0.20/0.25 0.50 0.50/1.00 0.025 0.025 11.00/12.50 0.90/1.25 0.50/1.00 V 0.20/0.30; W 0.90/1.25
S42300 - Lapelloy (619) 0.27/0.32 0.50 0.95/1.35 0.025 0.025 11.00/12.00 2.50/3.00 0.50 V 0.20/0.30
S44300 - MT443 0.20 1.00 1.00 0.040 0.030 18.0/23.0 - 0.50 Cu 0.90/1.25
S44600 51446 446 0.20 1.00 1.50 0.040 0.030 23.0/27.0 - - N 0.25
S64152 - XM-32 0.08/0.15 0.35 0.50/0.90 0.025 0.025 11.00/12.50 1.50/2.00 2.00/3.00 N 0.01/0.05; V 0.25/0.40
N08800 - 800 (332) 0.10 1.00 1.50 0.045 0.015 19.0/23.0 - 30.0/35.0 Fe 39.5 min; Al 0.15/0.60; Ti 0.15/0.60
N08810 - 800H 0.05/0.10 1.00 1.50 0.045 0.015 19.0/23.0 30.0/35.0 30.0/35.0 Cu 0.75; Fe 39.5 min; Al 0.15/0.60; Ti 0.15/0.60
N08811 - - 0.06/0.10 1.00 1.50 0.040 0.015 19.0/23.0 - 30.0/35.0 Cu 0.75; Fe 39.5 min; Al 0.15/0.60; Ti 0.15/0.60

Chemical compositions of AISI (ASTM/ASME) and UNS martensitic and precipitation hardening stainless steel grades
designation Chemical composition % by mass max unless stated
UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
S13800 - XM-13 PH13-8Mo 0.05 0.10 0.20 0.010 0.008 12.25/13.25 2.00/2.50 7.50/8.50 N 0.01; Al 0.90/1.35
S15500 - XM-12 15-5PH 0.07 1.00 1.00 0.040 0.030 14.0/15.5 - 3.50/5.50 Cu 2.5/4.5; Nb 0.15/0.45
S15700 - 632 15-7PH 0.09 1.00 1.00 0.040 0.030 14.00/16.00 2.00/3.00 6.50/7.25 Al 0.75/1.50
S17400 - 630 17-4PH 0.07 1.00 1.00 0.040 0.030 15.5/17.5 - 3.00/5.00 Cu 3.00/5.00; Al 0.15/0.45
S17600 - 635 0.08 1.00 1.00 0.040 0.030 16.00/17.50 - 6.00/7.50 Al 0.40; Ti 0.40/1.20
S17700 - 631 17-7PH 0.09 1.00 1.00 0.040 0.040 16.00/18.00 - 6.50/7.75 Al 0.75/1.50
S35000 - 633 0.07/0.11 0.50 0.50/1.25 0.040 0.030 16.00/17.00 2.50/3.25 4.00/5.00 N 0.07/0.13
S35500 - 634 0.10/0.15 0.50 0.50/1.25 0.040 0.030 15.00/16.00 2.50/3.25 4.00/5.00 N 0.07/0.13
S41000 51410 410 0.15 1.00 1.00 0.040 0.030 11.5/13.5 - - -
S41040 - XM-30 0.18 1.00 1.00 0.040 0.030 11.0/13.0 - - Nb 0.05/0.30
S41400 51414 414 0.15 1.00 1.00 0.040 0.030 11.5/13.5 - 1.25/2.50 -
S41500 - - 0.05 0.60 0.50/1.00 0.030 0.030 11.5/14.0 0.50/1.00 3.5/5.5 -
S41600 51416 416 0.15 1.00 1.25 0.060 0.15 min 12.0/14.0 0.60 - Zr 0.60
S41610 - XM-6 (416 Plus X) 0.15 1.00 1.50/2.50 0.06 0.15 min 12.0/14.0 - - -
S41623 51416Se 416Se 0.15 1.00 1.25 0.060 0.060 12.0/14.0 - - Se 0.15 min
S42000 51420 420 0.15 min 1.00 1.00 0.040 0.030 12.0/14.0 - - -
S42010 - Trim Rite 0.15/0.30 1.00 1.00 0.040 0.030 13.5/15.00 0.40/0.85 0.35/0.85 -
S42020 51420F 420F 0.15 min 1.00 1.25 0.060 0.15 min 12.0/14.0 0.60 - -
S42023 51420FSe 420FSe 0.30/0.40 1.00 1.25 0.060 0.060 12.0/14.0 - - Se 0.15 min
S42900 51429 429 0.12 1.00 1.00 0.040 0.030 14.0/16.0 - - -
S43100 51431 431 0.20 1.00 1.00 0.040 0.030 15.0/17.0 - 1.25/2.50 -
S44002 51440A 440A 0.60/0.75 1.00 1.00 0.040 0.030 16.0/18.0 0.75 - -
S44003 51440B 440B 0.75/0.95 1.00 1.00 0.040 0.030 16.0/18.0 0,75 - -
S44004 51440C 440C 0.95/1.20 1.00 1.00 0.040 0.030 16.0/18.0 0.75 - -
S44020 51440F 440F 0.95/1.20 1.00 1.25 0.060 0.15 min 16.0/18.0 0.75 - Zr 0.75
S44023 51440FSe 440FSe 0.95/1.20 1.00 1.25 0.060 0.060 16.0/18.0 - - Se 0.15 min
S45000 - XM-25 Custom 450 0.05 1.00 1.00 0.030 0.030 14.00/16.00 0.50/1.00 5.00/7.00 Cu 1.25/1.75; Nb 8xC min
S45500 - XM-16 Custom 455 0.05 0.50 0.50 0.040 0.030 11.00/12.50 0.50 7.50/9.50 Cu 1.50/2.50; Nb 0.10/0.50
S45503 - - 0.010 0.20 0.50 0.010 0.010 11.00/12.50 0.50 7.50/9.50 Cu 1.50/2.50; Ti 1.00/1.35
S46500 - - 0.02 0.25 0.25 0.015 0.010 11.00/12.50 0.75/1.25 10.75/11.25 Mo 0.75/1.25; Ti 1.50/1.80
S66286 - A286 0.08 1.00 2.00 0.040 0.030 13.50/16.00 1.00/1.50 24.0/27.0 Al 0.35; B 0.0010/0.010; Ti 1.90/2.35; V 0.10/0.50


Composition of Duplex Stainless Steel



| Top |



Specification of Carbon Steel

CARBON STEEL, ALLOY STEEL, LOW TEMP, PIPE & TUBES SPECIFICATION

CHEMICAL ANALYSIS
Mechnical Properties SPECIFIC REQUIREMENT
Tensile Strength Yield Strength Elongation
Specification WT C% Mn% P% MAX S% MAX Si% Cr% Mo% Mpa Mpa 50mm MIN Longitudinal  

ASTM A 53/A
ASTM A 53/B
ASTM A 106/A
ASTM A 106/B
ASTM A 106/C

AW
AW
AW
AW
AW

0.25MAX
0.30MAX
0.25MAX
0.30MAX
0.35MAX

0.95MAX
1.20MAX
0.27-0.93
0.29-1.06
0.29-1.06
0.050
0.050
0.025
0.025
0.025
0.060
0.060
0.025
0.025
0.025
-
-
0.10MIN
0.10MIN
0.10MIN
-
-
0.40MAX
0.40MAX
0.40MAX
-
-
0.15MAX
0.15MAX
0.15MAX
331MIN
413MIN
330MIN
415MIN
485MIN
207 MIN
240MIN
205MIN
240MIN
275MIN
36
29.5
35/28
30/22
30/22
Cr     Mo   Cu    Ni    Va
0.40 0.15 0.40 0.40 0.08
five elements not to exceed 1%
ASTM A 179
ASTM A 214
ASTM A 192
ASTM A 209/T1
ASTM A 209/T1a
ASTM A 209/T1B
ASTM A 210/A-1
ASTM A 210/C
MW
MW
MW
MW
MW
MW
MW
MW
0.06-018
0.18MAX
0.06-0.18
0.10-0.20
0.15-0.25
0.14MAX
0.27MAX
0.35MAX
0.27-0.63
0.27-0.63
0.27-0.63
0.30-0.80
0.30-0.80
0.30-0.80
0.93MAX
0.29-1.06
0.048
0.050
0.048
0.045
0.045
0.045
0.048
0.048
0.048
0.050
0.048
0.045
0.045
0.045
0.058
0.058
-
-
0.25MAX
0.10-0.50
0.10-0.50
0.10-0.50
0.10MIN
0.10MIN
-
-
-
-
-
-
-
-
-
-
-
0.44-0.65
0.44-0.65
0.44-0.65
-
-
325MIN
385MIN
325MIN
380MIN
365MIN
415MIN
415MIN
485MIN
180MIN
180MIN
180MIN
205MIN
195MIN
220MIN
255MIN
275MIN
35.0
35.0
35.0
30/22
30/22
30/22
30/22
30/22
Hardness 72 HRB MAX
Hardness 72 HRB MAX
Hardness 77 HRB MAX
Hardness 80 HRB MAX
Hardness 81 HRB MAX
Hardness 77 HRB MAX
Hardness 79 HRB MAX
Hardness 89 HRB MAX
ASTM A 213/T2
ASTM A 213/T5
ASTM A 213/T11
ASTM A 213/T12
ASTM A 213/T22
MW
MW
MW
MW
MW
0.10/0.20
0.15MAX
0.15MAX
0.15MAX
0.15MAX
0.30-0.61
0.30-0.60
0.30-0.60
0.30-0.61
0.30-0.60
0.045
0.030
0.030
0.045
0.030
0.045
0.030
0.030
0.045
0.030
0.10-0.30
0.50MAX
0.50-1.00
0.50MAX
0.50MAX
0.50-0.81
4.00-6.00
1.00-1.50
0.80-1.25
1.90-2.60
0.44-0.65
0.44-0.65
0.44-0.65
0.44-0.65
0.87-1.13
415MIN
415MIN
415MIN
415MIN
415MIN
205MIN
205MIN
205MIN
220MIN
205MIN
30/22
30/22
30/22
30/22
30/22
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
ASTM A 333/1
ASTM A 333/6
ASTM A 334/1
ASTM A 334/6
AW
AW
AW
AW
0.30MAX
0.30MAX
0.30MAX
0.30MAX
0.40-1.06
0.29-1.06
0.40-1.06
0.29-1.06
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
-
0.10MIN
-
0.10MIN
-
-
-
-
-
-
-
-
380MIN
415MIN
380MIN
415MIN
205MIN
240MIN
205MIN
240MIN
25/20
30/22
35/28
30/22
Impact AS-50F
FOR 40X10J/18/14
-50F 40X10J/18/14
90 HRB MAX
ASTM A 335/P1
ASTM A 335/P2
ASTM A 335/P5
ASTM A 335/P9
ASTM A 335/P11
ASTM A 335/P12
ASTM A 335/P22
AW
AW
AW
AW
AW
AW
AW
0.10-0.20
0.10-0.20
0.15MAX
0.15MAX
0.15MAX
0.15MAX
0.15MAX
0.30-0.80
0.30-0.61
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.61
0.30-0.60
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.10-0.50
0.10-0.30
0.50MAX
0.25-1.00
0.50-1.00
0.50MAX
0.50MAX
-
0.50-0.81
4.00-6.00
8.00-10.00 1.00-1.50
0.80-1.25
1.90-2.60
0.44-0.65
0.44-0.65
0.45-0.65
0.09-1.10
0.44-0.65
0.44-0.65
0.87-1.13
380MIN
380MIN
415MIN
415MIN
415MIN
415MIN
415MIN
205MIN
205MIN
205MIN
172MIN
205MIN
205MIN
205MIN
30/22
30/22
30/22
30/22
30/22
50/22
30/22
 
BS/3059/1/33
BS/3059/2/33
BS/3059/2/45
BS/3059/2/620
  0.15MAX
0.15MAX
0.12-0.18
0.10-0.15
0.30-0.70
0.40-0.70
0.90-1.20
0.40-0.70
0.050
0.050
0.035
0.040
0.050
0.050
0.035
0.040
-
0.10-0.35
0.10-0.35
0.10-0.35
-
-
-
0.70-1.10
-
-
-
0.45-0.65

324-441
324-441
441-560
441-618
186MIN
186MIN
245MIN
235MIN
25
21
22
22
 
DIN/17175/ST35.8
DIN/17175/ST45.8
DIN/17175/15MO3
DIN/17175/13CrMO44
DIN/17175/10CrM910
  0.17MAX
0.22MAX
0.12-0.20
0.10-0.18
0.15MAX
0.40MIN
0.45MIN
0.50-0.80
0.40-0.70
0.40-0.60
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.040
0.35MAX
0.10-0.35
0.10-0.35
0.10-0.35
0.15-0.50
-
-
-
0.70-1.60
2.0-2.5
-
-
0.25-0.35
0.40-0.50
0.9-1.10
340-441
441-540
441-540
441-570
441-570
235MIN
255MIN
284MIN
294MIN
294MIN
25
25
21
22
22
 
ASTM A 199/T5
ASTM A 199/T11
ASTM A 199/T22
ASTM A 199/T4
ASTM A 199/T7
ASTM A 200/T5
ASTM A 200/T11
ASTM A 200/T22
ASTM A 200/T4
ASTM A 200/T7
ASTM A 199/T9
MW
MW
MW
MW
MW
MW
MW
MW
MW
MW
MW
0.50-0.15
0.50-0.15
0.50-0.15
0.15MAX
0.15MAX
0.15MAX
0.50-0.15
0.50-0.15
0.50-0.15
0.15MAX
0.15MAX
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.30-0.60
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.50MAX
0.50-1.00
0.50MAX
0.50-1.00
0.50-1.00
0.50-1.00
0.50-1.00
0.50MAX
0.50-1.00
0.50-1.00
0.25-1.00
4.00-6.00
1.00-1.50
1.90-2.60
2.15-2.85
6.00-8.00
4.00-6.00
1.00-1.50
1.90-2.60
2.15-2.85
6.00-8.00
8.00-10.0
0.45-0.65
0.44-0.65
0.87-1.13
0.44-0.65
0.45-0.65
0.45-0.65
0.44-0.65
0.87-1.13
0.44-0.65
0.45-0.65
0.90-1.10
415MIN
415MIN
415MIN
415MIN
415MIN
415MIN
415MIN
415MIN
415MIN
415MIN
415MIN
170MIN
170MIN
170MIN
170MIN
170MIN
170MIN 170MIN
170MIN
170MIN
170MIN
170MIN
30/22
30/22
30/22
30/22
30/22 30/22
30/22
30/22
30/22
30/22
30/22
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX
Hardness 85 HRB MAX


| Top |



Specification of Alloy Steel Pipes

Pipes

Tubes

ASTM A 335 Grade P - 11
ASTM 213 Grade T - 11
ASTM A 335 Grade P - 12
ASTM 213 Grade T - 12
ASTM A 335 Grade P - 22
ASTM 213 Grade T - 22
ASTM A 335 Grade P - 9
ASTM 213 Grade T - 9
ASTM A 335 Grade P - 9 A
ASTM 213 Grade T - 9 A
ASTM A 335 Grade P - 5
ASTM 213 Grade T - 5
BS 3604 Grade 620 - 440
BS 3059 Grade 620 - 460
BS 3604 Grade 621
BS 3604 Grade 622
BS 3059 Grade 622 - 490
BS 3604 Grade 625
BS 3604 Grade 629 - 470
BS 3059 Grade 629 - 470
BS 3604 Grade 629 - 590
BS 3059 Grade 629 - 590
BS 3604 Grade 660
BS 3604 Grade 762
BS 3059 Grade 762

 

BS 3059 Grade 243
ASTM 213 Grade T - 2
ASTM 213 Grade T - 1 B
DIN 17175 10 Cr Mo 910
DIN 17175 13 Cr Mo 44
DIN 17175 X 20 Cr Mo V 121
 
ASTM 213 Grade T - 1
 
DIN 17175 15 Mo 3
 
DIN 17175 14 Mo V 63


| Top |



Chemical properties of Nickel alloys

BRAND® UNS No Ni Co Mo C Cr V W Al Cu Nb Ti Fe Others
Hastelloy-A   57 ~ 21   1.0*   ~ ~ ~ ~ ~ 19 ~
Hestelloy-B   62 2.5* 28   1.0*   ~ ~ ~ ~ ~ 5.5 0.4V
Hestelloy-B2 N10665 66 0.75* 28   1.0*   ~ 0.4* ~ ~ ~ 2.0* ~
Hestelloy-C N10002 rest/bal 1.25 17 0.07 16 0.3 40 - - - - 5.75 Mn 1.0 :Si 0 0.70
Hestelloy-C22   54 2.5* 14   21   3 0.4* ~ ~ ~ 5.0* 0.35*V
Hestelloy-C276 N10276 56 2.5* 17   16   4 0.4* ~ ~ ~ 2.5 0.35*V
Hestelloy-C4 N06455 54 1.25* 16   16   ~ 0.4* ~ ~ 0.5* 2.0* ~
Hestelloy-D   85 ~ ~   1.0*   ~ ~ 4.0* ~ ~ 1.0* 9 si
Hestelloy-F   45 2.5* 6   22   1.0* ~ ~ 2 ~ 18 ~
Hestelloy-G N06007 44 ~ 6.5   22   1.0* ~ 2 2 ~ 20 ~
Hestelloy-G2   47.0-52.0 - 5.0-7.0 0.03 23.0-26.0 - - - 0.70-1.20 - 0.70-1.50 rest/bal Mn 1.0;Si 1.0
Hestelloy-G3 N06985                          
Hestelloy-N N10003 72 0.2 16.5   7   0.5 0.25 ~ ~ 0.25 5.0* 0.01 B
Hestelloy-R   66 1.5* 5   15.5   ~ 2.2 ~ ~ 2.5 7.0* ~
Hestelloy-S N06635 68 ~ 14.5   15.5   ~ ~ ~ ~ ~ 1 0.5 Mn
0.4 Si
Hestelloy-W N10004 63 2.5* 24.5   5   ~ ~ ~ ~ ~ 5.5 0.6 V
Hestelloy-X N06002 47 1.5 9   22   0.6 ~ ~ ~ ~ 18.5 ~
Inco alloy A-286 S66286 25.5   1.5   15           2.1 56  
Inco alloy C-276 N10276 57   16   15.5   3.8         5.5  
Incoloy-330 N08330                          
Incoloy-600 N06600 75 - - 0.05 15.5 - - - - - - 8 -
Incoloy-601 N06601 60 - - 0.05 23 - - 1.4 - - - 14 -
Incoloy-604 rest/bal - - 0.04 15.8 - - - 0.1 Nb 2.0 - 7.2 Mn 0.20; Si 0.20
Incoloy-610   rest/bal - - 0.2 15.5 - - - 0.5 Nb 1.0 - 9 Mn 0.90;Si 2.0
Incoloy-617 N06617 54 12.5 9 0.07 22.5 - - 1 - - - - -
Incoloy-625 N06625 61 - 9 0.05 21.5 - - 0.4 - Nb 3.65 0.4 2.5 Mn 0.50; Si 0.50
Incoloy-671   51 - - 0.05 48 - - - - - 0.35 - -
Incoloy-700   46 28.5 3.75 0.12 15 - - 3 0.05 - 2.2 0.7 Mn 0.10; Si 0.30
Incoloy-702   rest/bal - - 0.04 15.6 - - 3.4 0.1 - 0.7 0.35 Mn 0.05: Si 0.20
Incoloy-705   rest/bal - - 0.3 15.5 - - - 0.5 - - 8 Mn 0.90 ; Si 5.5
Incoloy-800 N08800 32 ~ ~   20   ~ ~ ~ ~ ~ 47 ~
Incoloy-800H   32 - - 0.08 21 - - 0.3 - - 0.4 45 -
Incoloy-801 N08801 32 - - 0.05 20.5 - - - - - 1.1 45 -
Incoloy-802   32 - - 0.35 21 - - 0.6 - - 0.7 45 -
Incoloy-804   41 - - 0.05 29.5 - - 0.3 - - 0.6 25.4 -
Incoloy-805   36 - 0.5 0.12 7.5 - - - 0.1 - - rest/bal Mn 0.60;Si 0.50
Incoloy-810   32 - - 0.25 21 - - - 0.5 - - rest/bal Mn 0.90; Si 0.80
Incoloy-825 N08825 40 ~ 3 0.04 21   ~ ~ 2 ~ 1 32 ~
Incoloy-825CP   42 - 3 0.04 21.5 - - - 2.2 Nb0.9 - 30 -
Incoloy-840   20 - - 0.08 20 - - - - - - rest/bal Mn 1.0;Si 1.0
Incoloy-901   42 1.0* 5.7 0.05 12.5   ~ 0.35* ~ ~ 2.9 35 ~
Incoloy-901Mod   rest/bal - 5.8 0.05 12.5 - - - - - 2.9 34 Mn 0.09;Si 0.08;B0.015
Incoloy-903   38 15 - 0.02 - - - 0.7 - Nb 3.0 1.4 41 -
Incoloy-904   33 14 - 0.02 - - - - - - 1.7 50 -
Incoloy-925   42   3   21       2.2   2.1 32  
Incoloy-DS   37 - - 0.06 18 - - - - - - 42 Mn 1.0; Si 2.3
Incoloy-ma 956   - - - - 20 - - 4.5 - - 0.5 74.4 Y2.03 0.5
Inconel-600 N06600 75.5 ~ ~   15.5   ~ ~ ~ ~ ~ 7 ~
Inconel-601 N06601 60.5 ~ ~   23   ~ 1.35 ~ ~ ~ 14.1 ~
Inconel-617 N06617 52 12.5 9   22     1.2          
Inconel-625 N06625 61 ~ 9   21.5   ~ ~ ~ 3 ~ 3 ~
Inconel-690 N06690 61 ~ ~   29   ~ ~ ~ ~ ~ 9 ~
Inconel-702   79 ~ ~   15.6   ~ 3.4 ~ ~ 0.7 0.4 ~
Inconel-706   41.5 1 ~   16   ~ ~ ~ 2.9 17.5 36 ~
Inconel-713C   72 ~ 4.5   13.4   ~ 6.2 ~ 2.3 1.0* 1.5* ~
Inconel-718 N07718 53 ~ 3   18.5   ~ ~ ~ 5 0.8 18 ~
Inconel-X(X750) N07750 73 1 ~   15   ~ 0.9 ~ ~ 2.5 7 ~
Inconel-W(722)   75 ~ ~   15   ~ 0.6 ~ ~ 2.4 6.5 ~
Invar-42                            
GMR 235   63 ~ 5.2   15.5   ~ 3.7 ~ ~ 2 10 0.06 B
IN-657   49 ~ ~   48   ~ ~ ~ 1.5 ~ ~ ~
Monel-400 N04400 65 - - 0.12 - - - - 32 - - 1.5 Mn 1.0
Monel-401 N04401 43 - - 0.1 - - - - 53 - - 0.75 Si 0.25; Mn 2.25
Monel-404 N04404 52.0-57.0 -   0.15   - - 0.05 rest/bal - - 0.5 Mn 0.10; Si 0.10;S o.024
Monel-405 N04405                          
Monel-502 N05502 63.0-17.0 - - 0.1 - - - 2.5-3.5 rest/bal - 0.5 2 Mn 1.5;Si 0.5; S 0.010
Monel-K500 N05500 64 - - 0.13 - - - 2.8 30 - 0.6 1 Mn 0.8
Monel-R405 N04405 66 - - 0.15 - - - - 31 - - 1.2 Mn 1.0; S 0.04
Nimonic alloy-75 N06075 77 ~ ~   20   ~ 0.15 ~ ~ 0.4 5.0* ~
Nimonic alloy-80   74 2.0* ~   20   ~ 1.3 ~ ~ 2.2 1.5* ~
Nimonic alloy-80A N07080 76       19.5     1.4     2.4    
Nimonic alloy-81   65 ~ ~   30   ~ 1 ~ ~ 1.75 1.0* ~
Nimonic alloy-86   64.5 ~ 10   25   ~ ~ ~ ~ ~ ~ 0.15 Mn
0.03Ce
Nimonic alloy-90 N07090 60 16.5     19.5     1.5     2.5    
Nimonoc alloy-C263 N07263                          
Nimonic alloy-942   48 1.0* 5.5   12.5   ~ 4 ~ ~ 3.7 2.5 0.015 B


| Top |



Product Specification of Nickel Alloys




| Top |



(ASTM) standards for stainless steels for general applications

American (ASTM) standards for stainless steels for general applications

Std Number

Title

General

ASTM A450

Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

ASTM A480

Specification for General Requirements for Flat-Rolled Stainless And Heat-Resisting Steel Plate, Sheet and Strip

ASTM A484

Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

ASTM A555

Specification for General Requirements for Stainless Steel Wire and Wire Rods

ASTM A999

Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A1016

Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel and Stainless Steel Tubes

Flat Products

ASTM A167

Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip

ASTM A176

Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

ASTM A666

Specification For Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate and Flat Bar

ASTM A693

Specification for Precipitation-Hardening Stainless And Heat-Resisting Steel Plate, Sheet and Strip

Long Products

ASTM A276

Specification for Stainless Steel Bars and Shapes

ASTM A314

Specification for Stainless Steel Billets and Bars for Forging

ASTM A493

Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

ASTM A564

Specification for Hot-Rolled And Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

ASTM A565

Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High Temperature Service

ASTM A582

Specification for Free Machining Stainless Steel Bars

Forgings

ASTM A473

Specification for Stainless Steel Forgings

ASTM A705

Specification for Age Hardening Stainless and Heat Resisting Steel Forgings

Castings

ASTM A297

Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant for General Application

ASTM A743

Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

ASTM A744

Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

ASTM A890

Standard Specification for castings, iron-chromium-nickel-molybdenum corrosion-resistant, duplex (austenitic/ferritic) for general application

Pipes

ASTM A312 / A312M

Seamless and Welded Austenitic Stainless Steel Pipe

ASTM A358 / A358M

Electric-Fusion-Welded (EFW) Austenitic Chromium-Nickel Alloy Steel Pipe for High Temperature Service

ASTM A409 / A409M

Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service

ASTM A731 / A731M

Seamless and Welded Ferritic and Martensitic Stainless Steel Pipe

ASTM A790 / A790M

Seamless and Welded Ferritic / Austenitic Stainless Steel Pipe

ASTM A450 / A450M

General Requirements for Carbon, Ferritic Alloy and Austenitic Steel Tubes

ASTM A530 / A530M

General Requirements for Specialised Carbon and Alloy Steel Pipe

JIS G3459

Stainless Steel Pipes

Higher Austenitic

ASTM B673

UNS N08904 UNS N08925 and UNS N08926 Welded Pipe

ASTM B677

UNS N08904 UNS N08925 and UNS N08926 Seamless Pipe and Tube

ASTM A268

Specification for Seamless and Welded Ferritic Stainless Steel Tubing for General Service

ASTM A511

Specification for Seamless Stainless Steel Mechanical Tubing

ASTM A632

Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

ASTM A789

Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

Pipe Fittings & Flanges

ASTM A182 / A182M

Forged or Rolled Alloy Steel Pipe Flanges, Forged Fittings and Values and Parts for High Temperature Service

ASTM A403 / A403M

Wrought Austenitic Stainless Steel Piping Fittings

ASTM A530 / A530M

General Requirements for Specialised Carbon and Alloy Steel Pipe

ASTM A815 / A815M

Wrought Ferritic, Ferritic / Austenitic and Martensitic Stainless Steel Piping Fittings

ASTM A276

Stainless and Heat Resisting Steel Bars and Shapes

ASTM A351 / A351M

Steel Castings, Austenitic, for High Temperature Service

AS 2129

Flanges for Pipes, Values and Fittings

ANSI / ASME B 1.20.1

Pipe threads, general purpose (inch)

ANSI B 16.3

Malleable iron threaded fittings

ANSI B 16.5

Steel pipe flanges and flanged fittings

ANSI B 16.9

Factory made wrought steel butt welding fittings

ANSI B 16.11

Forged steel fittings wocket-welding and threaded

ANSI B 16.25

Butt-welding ends

ANSI B 16.28

Wrought steel butt welding short radius elbows and returns

Tube & Tube Fittings

ASTM A213 / A213M

Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater and Heat Exchanger Tubes

ASTM A249 / A249M

Welded Austenitic Steel Boiler, Superheater, Heat Exchanger and Condenser Tubes

ASTM A269

Seamless and Welded Austenitic Stainless Steel Tubing for General Service

ASTM A270

Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

ASTM A450 / A450M

General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

ASTM A554

Welded Stainless Steel Mechanical Tubing

ASTM A791 / A791M

Welded Unannealed Ferritic Stainless Steel Tubing

ASTM A789 / A789M

Seamless and Welded Ferritic / Austenitic Stainless Steel Tubing for General Service

AS 1163

Structural Steel Hollow Sections (Dimensional Tolerances)

AS 1528

Tubes (Stainless Steel) and Tube Fittings for the Food Industry.

ASTM B674

UNS N08904 UNS N08925 and UNS N08926 Welded Pipe

ASTM B677

UNS N08904 UNS N08925 and UNS N08926 Seamless Pipe and Tube

ASTM A790

Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

ASTM A813

Specification for Single or Double Welded Austenitic Stainless Steel Pipe

ASTM A814

Specification for Cold Worked Welded Austenitic Stainless Steel Pipe


| Top |



Copper Alloys

Copper or Copper Alloy Product

ASTM Spec

Hard drawn copper wire

B1

Medium hard drawn copper wire

B2

Annealed copper wire

B3

Bronze trolley wire

B9

Free cutting brass rod, bar, and shapes for use in screw machines

B16

Cartridge brass sheet, strip, plate, bar, and disks

B19

Naval brass rod, bar, and shapes

B22

Bronze castings for bridges and turntables

B22

Copper alloy ingots

B30

Tinned soft or annealed copper electrical wire

B33

Standard sized seamless copper pipe

B43

Copper trolley wire

B47

Annealed rectangular and square bare copper electrical wire

B48

Hot rolled copper rod redraw for electrical use

B49

Steam or valve bronze castings

B61

Bronze rough castings for locomotive wear parts

B66

Car and tender lined journal bearings

B67

Seamless bright annealed copper tube

B68

Seamless copper tube

B75

Seamless copper water tube

B88

General purpose and pressure vessel Cu-Si alloy plate, sheet, strip, and rolled bar

B96

Cu-Si alloy rod, bar, and shapes

B98

General purpose Cu-Si alloy wire

B99

Rolled copper alloy bearing and expansion plates and sheets for bridges and structural use

B100

Lead coated copper sheet

B101

Phosphor bronze plate, sheet, strip, and rolled bar

B103

Hard drawn copper alloy wires for electrical conductors

B105

Copper and copper alloy seamless condenser tubes and ferrule stock

B111

Fig. 9 deep section grooved and fig. 8 Cur trolley wire for industrial haulage

B116

Leaded brass plate, sheet, strip, and rolled bar

B121

Copper and copper alloy forging rod, bar, and shapes

B124

Cartridge brass cartridge case cups

B129

Commercial bronze strip for bullet jackets

B130

Copper alloy bullet jacket cups

B131

Copper rod, bar, and shapes

B133

Brass wire

B134

Seamless brass tube

B135

Manganese bronze rod, bar, and shapes

B138

Phosphor bronze rod, bar, and shapes

B139

Leaded red brass hardware bronze rod, bar, and shapes

B140

Aluminum bronze sand castings

B148

Aluminum bronze rod, bar, and shapes

B150

Nickel Silver (Cu-Ni-Zn) and Cu-Ni rod and bar

B151

Copper sheet, strip, plate, and rolled bar

B152

Phosphor bronze wire

B159

Aluminum bronze, plate, sheet, strip, and rolled bar

B169

Copper alloy condenser tube plates

B171

Rope lay std. conductors w/ bunch stranded members

B172

Rope lay std. conductors w/ concentric stranded members

B173

Bunch stranded conductors

B174

Brass die castings

B176

Copper bus bar, rod, and shapes

B187

Seamless copper bus pipe and tube

B188

Lead copper and Lead copper alloy coated soft copper electrical wire

B189

Beryllium Copper (Cu-Be) alloy plate, sheet, strip, and rolled bar

B194

Beryllium Copper (Cu-Be) alloy rod and bar

B196

Beryllium Copper (Cu-Be) alloy wire

B197

Nickel Silver (Cu-Ni-Zn) and Cu-Ni alloy wire

B206

Cored, annular, concentric-lay stranded copper conductors

B226

Concentric-lay stranded copper and copper clad steel conductors

B229

Tinned hard drawn and medium hard drawn copper electrical wire

B246

Copper base alloy centrifugal castings

B271

Copper flat wire and strip w/rolled or drawn edges

B272

Seamless copper tube for air conditioning and refrigerator use

B280

Copper and copper alloy hot pressed die forgings

B283


Copper conductors for electronic equipment wire hookups

B286

Manganese brass (Cu-Zn-Mn) sheet and strip

B291

Silver coated annealed copper wire

B298

Free cutting copper rod and bar

B301

Threadless copper pipe

B302

Copper drainage tube (DWV)

B306

Seamless copper alloy pipe and tube

B315

Nickel coated annealed copper wire

B355

Copper and copper alloy seamless condenser and heat exchanger tubes with fins

B359

Hard drawn copper capillary tube for restrictor applications

B360

Cu-Ni alloy castings

B369

Copper sheet and strip for building construction

B370

Cu-Zinc-Si alloy rod

B371

Seamless copper and copper alloy rectangular wave guide tube

B372

U-bend seamless copper and copper alloy heat exchanger and condenser tubes

B395

Cu-Ni-Si alloy rod and bar

B411

Cu-Ni-Si alloy wire

B412

Cu-Al-Si-Co alloy and Cu-Ni-Al-Si alloy sheet and strip

B422

Gear bronze castings

B427

Copper and copper alloy clad steel plate

B432

Cu-Co-Be (UNS C17500) and Cu-Ni-Be (UNS C17510) rod and bar

B441

Welded copper tube

B447

Copper foil, strip and sheet for printed circuits and carrier tapes

B451

Leaded brass (Cu-Zn-Pb) rod

B453

Leaded brass (Cu-Zn-Pb) extruded shapes

B455

Cu-Fe alloy plate, sheet, strip, and rolled bar

B465

Seamless Cu-Ni pipe and tube

B466

Welded Cu-Ni pipe

B467

Seamless Cu-Ni pipe and tube

B469

Bonded copper conductors for use in hookup wire for electronic equipment

B470

Cast Cu-Ni ship tailshaft sleeves

B492

Compact round concentric-lay-stranded copper conductors

B496

Copper alloy continuous castings

B505

Copper clad stainless steel sheet and strip for building construction

B506

Copper alloy strip for flexible metal hose

B508

Cu-Co-Be alloy, plate, sheet, strip, and rolled bar

B534

Welded copper and copper alloy heat exchanger tube

B543

Seamless and welded Cu-Ni tubes for water desalination plants

B552

Light gauge UNS C26000 brass strip in narrow widths for heat exchanger tubing

B569

Beryllium Copper (Cu-Be) alloy forgings and extrusions

B570

General purpose copper alloy sand castings

B584

Welded brass tube

B587

Cu-Zn-Sn alloy plate, sheet, strip, and rolled bar

B591

Cu-Zn-Al-Co alloy plate, sheet, strip, and rolled bar

B592

Welded copper alloy pipe

B608

High-strength, high-conductivity copper alloy electronic wire

B624

Copper and copper alloy solar heat absorber panels

B638

Welded copper and copper alloy tube for AC or refrigeration use

B640

Seamless and type D welded copper distribution tube

B641

Beryllium Copper (Cu-Be) alloy seamless tube

B643

Brass, Cu, and Cr plated pipe nipples

B687

Cu, copper alloy, and Cu-clad stainless steel sheet and strip for electrical cable shielding

B694

UNS C69100 seamless copper alloy pipe and tube

B706

Welded copper water tube

B716

Fine wire and rope-lay bunch stranded copper electrical conductors

B738

Cu-Ni-Sn spinodal alloy strip

B740

Seamless copper tube coils

B743

Cu-Zn alloy sheet and strip

B747

Sand cast copper alloy for valve applications

B743

Cu-Co-Be alloy sheet and strip

B768

Round wire for use as grid side rods in electron tubes

F9

Wrought oxygen-free copper for electronic devices

F68

Wrought electronic grade copper alloys

F96

General use nonferrous nuts

F467

General use nonferrous bolts, hex cap screws, and studs

F468


| Top |



Pipe Data

LINE PIPE DIMENSIONS    //   LINE PIPE WEIGHT   //   TUBES & PIPES

LINE PIPE DIMENSIONS
Nominal
pipe size
OD Schedule
10
Schedule
20
Schedule
30
Schedule
Standard
Schedule
40
Schedule
60
Schedule
XS
Schedule
80
Schedule
100
Schedule
120
Schedule
140
Schedule
160
Schedule
XXS
mm inch mm Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m Wall kg/m
3 1/8 10.3             1.7 0.357 1.7 0.357     2.4 0.470 2.4 0.470                    
6 1/4 13.7             2.2 0.625 2.2 0.625     3.0 0.804 3.0 0.804                    
10 3/8 17.1             2.3 0.848 2.3 0.848     3.2 1.10 3.2 1.10                    
15 1/2 21.3             2.8 1.26 2.8 1.26     3.7 1.62 3.7 1.62             4.8 1.95 7.5 2.54
20 3/4 26.7             2.9 1.68 2.9 1.68     3.9 2.19 3.9 2.19             5.6 2.89 7.8 3.63
25 1 33.4             3.4 2.50 3.4 2.50     4.5 3.23 4.5 3.23             6.4 4.23 9.1 5.45
32 11/4 44.2             3.6 3.38 3.6 3.38     4.8 4.47 4.8 4.47             6.4 5.60 9.7 7.97
40 11/2 48.3             3.7 4.05 3.7 4.05     5.1 5.40 5.1 5.40             7.1 7.23 10.2 9.58
50 2 60.3             3.9 5.3 3.9 5.3     5.5 7.47 5.5 7.47             8.7 11.1 11.1 13.4
65 22/2 73.0             5.2 8.62 5.2 8.62     7.0 11.4 7.0 11.4             9.5 14.9 14.0 20.4
80 3 88.9             5.5 11.3 5.5 11.3     7.6 15.3 7.6 15.3             11.1 21.3 15.2 27.7
90 31/2 101.6             5.7 13.6 5.7 13.6     8.1 18.6 8.1 18.6                 16.2 34.1
100 4 114.3             6.0 16.1 6.0 16.1     8.6 22.3 8.6 22.3     11.1 28.3     13.5 33.5 17.1 41.1
125 5 141.3             6.6 21.8 6.6 21.8     9.5 30.9 9.5 30.9     12.7 40.2     15.9 49.0 19.0 57.4
150 6 168.3             7.1 28.2 7.1 28.2     11.0 42.5 11.0 42.5     14.3 54.2     18.3 67.5 21.9 79.1
200 8 219.1     6.4 33.3 7.0 36.7 8.2 42.5 8.2 42.5 10.3 53.1 12.7 64.6 12.7 64.6 151.1 75.8 18.3 90.4 20.6 101 23.0 112.0 22.2 108.0
250 10 273.0     6.4 41.7 7.8 50.9 9.3 60.2 9.3 60.2 12.7 81.5 12.7 81.5 15.1 95.8 18.3 114.7 21.4 132.9 25.4 155 28.6 172.2 25.4 155.0
300 12 323.8     6.4 49.7 8.4 65.1 9.5 73.8 10.3 79.7 14.3 109.0 12.7 97.4 17.4 132.0 21.4 160.0 25.4 187.0 28.6 208 33.3 239.0 25.4 187.0
350 14 355.6 6.4 54.6 7.9 68.1 9.5 81.2 9.5 81.2 11.1 94.6 15.1 126.4 12.7 107.0 19.0 158.0 23.8 195.0 27.8 224.0 31.8 253 35.7 281.0    
400 16 406.4 6.4 62.6 7.9 77.9 9.5 93.1 9.5 93.3 12.7 123.0 16.7 160.0 12.7 123.0 21.4 203.0 26.2 245.0 30.9 286.0 36.5 333 40.5 365.0    
450 18 457.2 6.4 70.5 7.9 87.8 11.1 122.0 9.5 105.0 14.3 156.0 19.0 206.0 12.7 139.0 23.8 254.0 29.4 310.0 34.9 363.0 39.7 408 45.2 459.0    
500 20 508.0 6.4 78.5 9.5 117.0 12.7 155.0 9.5 117.0 15.1 183.0 20.6 248.0 12.7 155.0 26.2 311.0 32.5 381.0 38.1 441.0 44.4 508 50.0 564.0    
550 22 558.8 6.4 86.4 9.5 129.0 12.7 171.0 9.5 129.0     22.2 294.0 12.7 171.0 28.6 373.0 34.9 451.0 41.3 526.0 47.6 600 54.0 671.0    
600 24 609.6 6.4 94.7 9.5 141.0 14.3 210.0 9.5 141.0 17.4 255.0 24.6 355.0 12.7 187.0 30.9 441.0 38.9 547.0 45.0 639.0 52.4 719 59.5 807.0    
650 26 660.4 7.9 128.0 12.7 203.0     9.5 153.0         12.7 203.0                        
700 28 711.2 7.9 137.4 12.7 219.0 15.9 272.0 9.5 165.0         12.7 219.0                        
750 30 762.0 7.9 147.0 12.7 234.6 15.9 292.6 9.5 176.0         12.7 234.6                        
800 32 812.8 7.9 157.0 12.7 250.6 15.9 312.5 9.5 188.2         12.7 250.6                        
850 34 863.6 7.9 167.0 12.7 266.0 15.9 332.4 9.5 200.0         12.7 266.5                        
900 36 914.4 7.9 176.6 12.7 282.4 15.9 352.2 9.5 212.0         12.7 281.4                        
LINE PIPE WEIGHT
Nominal Pipe
Size
Ou
tside Diam
eter
Sch
*5
Sch
*10
Sche
dule
20
Sche
dule
30
Stan
da rd
weig
ht
Sched
ule
40
Extra Str
ong
Sche
dule
60
Sche
dule
80
sche
dule
100
Sche
dule
120
Sche
dule
140
Sche
dule
160
Do
uble
Ex.
Str.
mm
in
mm
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
Kg/m
8
1/4
13.7
--
0.491
--
--
0.63
0.63
0.80
--
0.80
--
--
--
--
--
10
3/8
17.1
--
0.631
--
--
0.84
0.84
1.10
--
1.10
--
--
--
--
--
15
1/2
21.3
0.801
0.999
--
--
1.27
1.27
1.62
--
1.62
--
--
--
1.95
2.55
20
3/4
26.7
1.020
1.280
--
--
1.69
1.69
2.19
--
2.19
--
--
--
2.90
3.63
25
1
33.4
1.290
2.090
--
--
2.50
2.50
3.23
--
3.23
--
--
--
4.23
5.45
32
11/4
42.2
1.650
2.69
--
--
3.38
3.38
4.47
--
4.47
--
--
--
5.60
7.76
40
11/2
48.3
1.900
3.11
--
--
4.05
4.05
5.41
--
5.41
--
--
--
7.24
9.55
50
2
60.3
3.340
3.92
--
--
5.44
5.44
7.48
--
7.48
--
--
--
11.11
13.45
65
21/2
73.0
3.690
5.26
--
--
8.62
8.62
11.41
--
11.41
--
--
--
14.91
20.39
80
3
88.9
4.510
6.45
--
--
11.29
11.29
15.27
--
15.27
--
--
--
21.33
27.67
90
31/2
101.6
5.180
7.41
--
--
13.57
13.57
18.63
--
18.63
--
--
--
--
--
100
4
114.3
5.940
8.38
--
--
16.07
16.07
22.31
--
22.31
--
28.30
--
33.53
41.02
125
5
141.3
9.340
11.60
--
--
21.78
21.78
30.95
--
30.95
--
40.28
--
49.09
57.42
150
6
168.3
11.30
13.80
--
--
28.26
28.26
42.56
--
42.56
--
54.20
--
67.55
79.18
200
8
219.1
14.80
20.00
33.31
36.79
42.53
42.53
64.63
53.09
64.63
75.89
90.43
100.93
111.25
107.87
350
10
273.1
22.60
27.80
41.77
51.00
60.29
60.29
81.55
81.54
95.97
114.70
133.00
155.10
172.25
155.10
300
12
323.9
31.24
35.99
49.72
65.20
73.82
79.72
97.44
108.96
132.01
159.85
186.92
208.04
238.72
186.92
350
14
355.6
34.34
54.68
67.94
81.28
81.28
94.49
107.38
126.68
158.08
194.90
224.60
253.53
281.68
--
400
16
406.4
41.56
62.63
77.86
93.21
93.21
123.29
123.29
160.12
203.48
245.50
286.62
333.11
365.39
--
450
18
457
46.80
70.59
87.79
122.36
105.14
155.91
139.19
205.80
254.59
309.76
363.65
408.45
459.51
--
500
20
508
59.32
78.84
177.07
155.10
117.07
183.37
155.01
247.85
550
22
559
65.30
86.50
129.01
171.01
129.01
--
171.01
--
600
24
610
82.52
94.45
140.94
209.54
140.94
255.14
186.92
355.02
650
26
660
--
127.50
202.83
--
152.87
--
202.83
--
700
28
711
--
137.42
218.73
272.18
164.80
--
218.73
--
750
30
762
118.33
147.36
234.64
292.06
176.73
--
236.64
--
800
32
813
--
152.28
250.55
311.95
188.66
342.70
250.55
--
850
34
864
--
167.20
266.46
331.83
200.59
364.58
266.46
--
900
36
914
--
177.13
282.36
351.72
212.52
420.52
282.36
--
TUBES & PIPES

Specification Chart of Tubes & Pipes

CHEMICAL COMPOSITION
CS :- Carbon Steel

Mechanical Propent-size: 8pt

Tensile Strength
Yield stress
Elongation In
Specification
WT
Type
C%
Mn% MAX
P% MI
S%
Si%
Mpa
Mpa
50mm MIN Longitudinal
ASTM A179
M/W
CS
0.06-0.18
0.27-0.63
0.048
0.058
--
--
--
--
ASTM A192
M/W
CS
0.06-0.18
0.27-0.63
0.048
0.058
0.25 MAX
--
--
--
ASTM A210/ A1
M/W
CS
0.27 MAX
0.93 MAX
0.048
0.058
0.10 MAX
312 MAX
255 MIN
30
DIN/17175/ST35.8
A/W
CS
0.17 MAX
0.40 MIN
0.040
0.040
0.35 MAX
340-441
235 MIN
25
DIN/17175/ST45.8
A/W
CS
0.22 MAX
0.45 MIN
0.040
0.040
0.10-0.35
441-540
255 MIN
21
IS 3074 CDS1
A/W
CS
0.20 MAX
0.30-0.60
0.050
0.050
--
432
373
--
IS 3074 CDS2
A/W
CS
0.10-0.18
0.40-0.80
0.050
0.050
--
432
373
--
IS 3074 CDS3
A/W
CS
0.10-0.18
0.40-0.80
0.050
0.050
--
432
373
--
IS 3074 CDS4
A/W
CS
0.10-0.18
0.60-0.90
0.050
0.050
--
569
461
--
IS 3074 CDS5
A/W
CS
0.10-0.18
0.60-0.90
0.050
0.050
--
687
589
--
DIN 2391 PART1 5T-35
--
CS
0.17
>0.04
0.050
0.050
0.35
432
-
5%
DIN 2391 PART1 5T-45
--
CS
0.21
>0.04
0.050
0.050
0.35
540
--
5%
BS 6323 PART 4
--
CS
0.25 MAX
1.25 MAX
0.050
0.050
0.35
520
415
5%


| Top |



Buttweld Fittings

 


| Top |



Socketweld Fittings


| Top |



flange Dimensions ANSI B-16.5


| Top |



flange Dimensions BS10

TABLE D
For Working Steam Pressure upto 50 lbs per sq. Inch

Nominal Pipe Size

O. D. of pipe

O. D.

P. C. D.

No. of bolt

Dia of bolt

Thickness

1/2"

21.3

95.3

66.7

4

12.7

4.8

3/4"

26.7

101.6

73.0

4

12.7

4.8

1"

33.4

114.3

82.6

4

12.7

4.8

1.1/4"

42.2

120.7

87.3

4

12.7

6.4

1.1/2"

48.3

133.4

98.4

4

12.7

6.4

2"

60.3

152.4

114.3

4

15.9

7.9

2.1/2"

73.0

165.1

127.0

4

15.9

7.9

3"

88.9

184.2

146.1

4

15.9

9.5

3.1/2"

101.6

203.2

165.1

4

15.9

9.5

4"

114.3

215.9

177.8

4

15.9

9.5

5"

141.3

254.0

209.6

8

15.9

12.7

6"

168.3

279.4

228.6

8

15.9

12.7

7"

190.5

304.8

260.4

8

15.9

12.7

8"

219.1

336.6

292.1

8

15.9

12.7

9"

244.5

368.3

323.9

8

15.9

15.9

10"

273.0

406.4

355.6

8

19.1

15.9

12"

323.9

457.2

406.4

12

19.1

15.9

14"

355.6

527.1

469.9

12

22.2

19.1

16"

406.4

577.9

520.7

12

22.2

19.1

18"

457.2

641.4

584.2

12

22.2

22.2

20"

508.0

704.9

641.4

16

22.5

25.4

24"

609.6

825.5

755.7

16

25.4

28.6


TABLE E
For Working Steam Pressure upto 100 lbs per sq. Inch

Nominal Pipe Size

O. D. of pipe

O. D.

P. C. D.

No. of bolt

Dia of bolt

Thickness

1/2"

21.3

95.3

66.3

4

12.7

6.4

3/4"

26.7

101.6

73.0

4

12.7

6.4

1"

33.4

114.3

82.6

4

12.7

7.1

1.1/4"

42.2

120.7

87.3

4

12.7

7.9

1.1/2"

48.3

133.4

98.4

4

12.7

8.7

2"

60.3

152.4

114.3

4

15.9

9.5

2.1/2"

73.0

165.1

127.0

4

15.9

10.3

3"

88.9

184.2

146.1

4

15.9

11.1

3.1/2"

101.6

203.2

165.1

8

15.9

11.9

4"

114.3

215.9

177.8

8

15.9

12.7

5"

141.3

254.0

209.6

8

15.9

14.3

6"

168.3

279.4

228.6

8

19.1

17.5

7"

190.5

304.8

260.4

8

19.1

19.1

8"

219.1

336.6

292.1

8

19.1

19.1

9"

244.5

368.3

323.9

12

19.1

20.6

10"

273.0

406.4

355.6

12

19.1

22.2

12"

323.9

257.2

406.4

12

22.2

25.4

14"

355.6

527.2

469.9

12

22.2

25.4

16"

406.4

577.9

520.7

12

22.2

25.4

18"

457.2

641.4

584.2

16

22.2

28.6

20"

508.0

704.9

647.4

16

22.2

31.8

24"

609.6

825.5

755.7

16

25.4

38.1


TABLE F
For Working Steam Pressure above 100 lbs and upto 150 lbs per sq. Inch

Nominal Pipe Size

O. D. of pipe

O. D.

P. C. D.

No. of bolt

Dia of bolt

Thickness

1/2"

21.3

95.3

66.7

4

12.7

9.5

3/4"

26.7

101.6

73.0

4

12.7

9.5

1"

33.4

120.7

87.3

4

15.9

9.5

1.1/4"

42.2

133.4

98.4

4

15.9

12.7

1.1/2"

48.3

139.7

104.8

4

15.9

12.7

2"

60.3

165.1

127.0

4

15.9

15.9

2.1/2"

73.0

184.2

146.1

8

15.9

15.9

3"

88.9

203.2

165.1

8

15.9

15.9

3.1/2"

101.6

215.9

177.8

8

15.9

19.1

4"

114.3

228.6

190.5

8

15.9

19.1

5"

141.3

279.4

235.0

8

19.1

22.2

6"

168.3

304.8

260.4

12

19.1

22.2

7"

190.5

336.6

292.1

12

19.1

22.2

8"

219.1

368.3

323.9

12

19.1

25.4

9"

244.5

406.4

355.6

12

22.2

25.4

10"

273.0

431.8

381.0

12

22.2

25.4

12"

323.9

489.0

438.2

16

22.2

28.6

14"

355.6

552.5

495.3

16

25.4

31.8

16"

406.4

609.6

552.5

20

25.4

31.8

18"

457.2

673.1

609.6

20

28.6

34.9

20"

508.0

736.6

673.1

24

28.6

38.1

24"

609.6

850.9

781.1

24

318

41.3


TABLE H
For Working Steam Pressure above 150 lbs and upto 250 lbs per sq. Inch

Nominal Pipe Size

O. D. of pipe

O. D.

P. C. D.

No. of bolt

Dia of bolt

Thickness

1/2"

21.3

114.3

82.6

4

15.9

12.7

3/4"

26.7

114.3

82.6

4

15.9

12.7

1"

33.4

120.7

87.3

4

15.9

14.3

1.1/4"

42.2

133.4

98.4

4

15.9

17.5

1.1/2"

48.3

139.7

104.8

4

15.9

17.5

2"

60.3

165.1

127.0

4

15.9

19.1

2.1/2"

73.0

184.2

146.1

8

15.9

19.1

3"

88.9

203.2

165.1

8

15.9

22.2

3.1/2"

101.6

215.9

177.8

8

15.9

22.2

4"

114.3

228.6

190.5

8

15.9

25.4

5"

141.3

279.4

235.0

8

19.1

28.6

6"

168.3

304.8

260.4

12

19.1

28.6

7"

190.5

336.6

292.1

12

19.1

31.8

8"

219.1

368.3

323.9

12

19.1

31.8

9"

244.5

406.4

355.6

12

22.2

34.9

10"

273.0

431.8

381.0

12

22.2

34.9

12"

323.9

489.0

438.2

16

22.2

38.1

14"

355.6

552.5

495.3

16

25.4

41.3

16"

406.4

609.6

552.5

20

25.4

44.5

18"

457.2

673.1

609.6

20

28.6

47.6

20"

508.0

736.6

673.1

24

28.6

50.8

24"

609.6

850.9

781.1

24

31.8

57.2


| Top |



flange Dimensions BS4504 PN 16

DN = Nominal size, D = Outside Diameter, A = Outside Dia of Neck , B1 = Bore of Type 101 & 112 Flange, C1 = Thickness of Plate Flange, C2 = Thickness of Weld_Neck and Boss Flange, N1 = Dia of Weld Neck, N2 = Dia of Boss,R = corner Radius, H1 = Length of Boss Flange, H2 = Length of Weld Neck Flange, H3 = Length of Neck:


Note: The flanges shown are only a small part of the range covered in BS 4504.
The Facings shown are type B (Raised Face).  Other Facings include:
Type A..Flat:  Type C..Tongue:   Type D..Groove   Type E..Spigot:  :Type F..Recess:   Type G..O-ring Recess:  Type H.,0-ring Groove:


NOTE all dimensions are in mm

DN

D

C1

C2

H1

H2

H3

R

A

N1

N2

B1

d1

f1

10

90

14

14

20

35

6

3

17,2

28

30

18

40

2

15

95

14

14

20

35

6

3

21,3

32

35

22

45

2

20

105

14

14

24

38

6

4

26,9

39

45

27,5

58

2

25

115

16

16

24

38

6

4

33,7

46

52

34,5

68

2

32

140

18

16

26

40

6

5

42,4

56

60

43,5

78

2

40

150

18

16

26

42

7

5

48,3

64

70

49,5

88

3

50

165

20

18

28

45

8

5

60,3

74

84

61,5

102

3

65

185

20

18

32

45

10

6

76,1

92

104

77,5

122

3

80

200

20

20

34

50

10

6

88,9

110

118

90,5

138

3

100

220

22

20

40

52

12

6

114,3

130

140

116

162

3

125

250

22

22

44

55

12

6

139,7

158

168

141,5

188

3

150

285

24

22

44

55

12

8

168,3

184

195

170,5

212

3

200

340

26

24

44

62

16

8

219,1

234

246

221,5

268

3

250

405

29

26

46

70

16

10

273

288

298

276,5

320

3

300

460

32

28

46

78

16

10

323,9

342

350

327,5

378

4

350

520

35

30

57

82

16

10

355,6

390

400

359

438

4

400

580

38

32

63

85

16

10

406,4

444

456

411,0

490

4

450

640

42

34

68

87

16

12

457,0

490

502

462,0

550

4

500

715

46

34

73

90

16

12

508,0

546

559

513,5

610

4

600

840

52

36

83

95

18

12

610,0

650

658

616,5

725

5

700

910

60

36

83

100

18

12

711,0

750

760

-

795

5

800

1025

68

38

90

105

20

12

813,0

848

864

-

900

5

900

1125

76

40

94

110

20

12

914,0

948

968

-

1000

5

1000

1255

84

42

100

120

22

12

1016,0

1056

1072

-

1115

5

1200

1485

98

48

-

130

30

12

1220,0

1260

-

-

1330

5

1400

1685

-

52

-

145

30

12

1420,0

1465

-

-

1530

5

1600

1930

-

58

-

160

35

12

1620,0

1668

-

-

1750

5

DN

D

C1

C2

H1

H2

H3

R

A

N1

N2

B1

d1

f1

 

FLANGE BOLTING

K= Bolt Circle Diameter, L = Dia Of Bolt Hole,
No = Number of Holes, Size = Size of Bolts

DN

K

L

No

Size

mm

mm

mm

-

mm

10

60

14

4

M12

15

65

14

4

M12

20

75

14

4

M12

25

85

14

4

M12

32

100

18

4

M16

40

110

18

4

M16

50

125

18

4

M16

65

145

18

8

M16

80

160

18

8

M16

100

180

18

8

M16

125

210

18

8

M16

150

240

22

8

M20

200

295

22

12

M20

250

355

26

12

M24

300

410

26

12

M24

350

470

26

16

M24

400

525

30

16

M27

450

585

30

20

M27

500

650

33

20

M30

600

770

36

20

M33

700

840

36

24

M33

800

950

39

24

M36

900

1050

39

28

M36

1000

1170

42

28

M39

1200

1390

48

32

M45

1400

1590

48

36

M45

1600

1820

56

40

M52

DN

K

L

No

Size

BS EN 1092-1 PN 25 Dimensions

Stainless Steel Flanges

DN = Nominal size, D = Outside Diameter, A = Outside Dia of Neck , B1 = Bore of Type 01 & 12 Flange, C1 = Thickness of Plate Flange,
C2 = Thickness of Weld_Neck and Boss Flange, N1 = Dia of Weld Neck, N2 = Dia of Boss,R = corner Radius, H1 = Length of Boss Flange,
H2 = Length of Weld Neck Flange, H3 = Length of Neck : S = neck thickness

Note: The flange types shown are only a small part of the range covered in BS EN 1092-1.

  • type 05 is a blank flange
  • type13 is a screwed boss flange
  • type 02 is a loose plate flange used with either
      a type 32 weld on plate collar or
      a type 33 lapped pipe end
  • a type 04 flange is a loose flange for use with a
       type 34 a weld-neck collar
  • type 21 is an integral flange

The Facings shown are type B (Raised Face).  Other Facings include:
Type A..Flat:  Type C..Tongue:   Type D..Groove   Type E..Spigot:  :Type F..Recess:   Type G..O-ring Spigot:  Type H.,0-ring Groove:

A typical designation for a flange would be BS EN 1092-1/01B/DN150/PN25/ */S235JR
Key: = Standard No/Flange Type & Face Type / Nominal Size/ Pressure Rating/*/ Material Designation.
* Normally not used.   For 01 type flanges above 600 mm the bore B1 would be specified here .   * for type 11 and 31 the neck thickness (S) is specified here.
An example designation for an flange for an 800mm pipe ...  BS EN 1092-1/01B/DN800/PN25/818/S235JR

This is an extremely simplified note.   To obtain a comprehensive description with the various variations the standards must be used.

Note : All Dimensions in mm

DN

D

C1

C2

H1

H2

H3

R

A

N1

N2

B1

d1

f1

S

10

90

14

14

20

35

6

4

17,2

28

30

18

40

2

1,8

15

95

14

14

20

35

6

4

21,3

32

35

22

45

2

2,0

20

105

14

14

24

38

6

4

26,9

39

45

27,5

58

2

2,3

25

115

16

16

24

38

6

4

33,7

46

52

34,5

68

2

2,6

32

140

18

16

26

40

6

6

42,4

56

60

43,5

78

2

2,6

40

150

18

16

26

42

7

6

48,3

64

70

49,5

88

2

2,6

50

165

20

20

34

48

8

6

60,3

75

84

61,5

102

2

2,9

65

185

22

22

38

52

10

6

76,1

90

104

77,5

122

2

2,9

80

200

24

24

40

58

12

8

88,9

105

118

90,5

138

2

3,2

100

235

26

24

44

65

12

8

114,3

134

145

116

162

2

3,6

125

270

28

26

48

68

12

10

139,7

162

170

141,5

188

2

4,2

150

300

30

28

52

75

12

10

168,3

192

200

170,5

218

2

4,5

200

360

32

30

52

80

16

10

219,1

244

256

221,5

278

2

6,3

250

425

35

32

60

88

18

12

273,0

298

310

276,5

335

2

7,1

300

485

38

34

67

92

18

12

323,9

352

364

327,5

395

2

8,0

350

555

42

38

72

100

20

12

355,6

398

418

359,5

450

2

8,0

400

620

46

40

78

110

20

12

406,4

452

472

411,0

505

2

8,8

450

670

50

46

84

110

20

12

457,0

500

520

462,0

555

2

8,8

500

730

56

48

90

125

20

12

508,0

558

580

513,5

615

2

10,0

600

845

68

58

100

125

20

12

610,0

660

684

616,5

720

2

11,0

700

960

-

46

-

125

20

12

711,0

760

-

-

820

2

12,5

800

1085

-

50

-

135

22

12

813,0

864

-

-

930

2

14,2

900

1185

-

54

-

145

24

12

914,0

968

-

-

1030

2

16,0

1000

1320

-

58

-

155

24

16

1016,0

1070

-

-

1140

2

17,5

1200

1530

-

-

-

-

-

18

1219,0

-

-

-

1350

2

-

1400

1755

-

-

-

-

-

18

1422,0

-

-

-

1560

2

-

1600

1975

-

-

-

-

-

20

1626,0

-

-

-

1780

2

-

DN

D

C1

C2

H1

H2

H3

R

A

N1

N2

B1

d1

f1

S

Note: in BS EN 1092-1:2002   f1= 2 for all sizes.
In the latest versions of the relevant DIN standard. f1 varies as follow
(DN =< 32 f1 = 1-2, DN 32->250(inc) f1= 1-3, DN 250->500(inc) f1= 1-4, Dn >500 f1= 1-5 )..

Flange Bolting

K = Bolt Circle Diameter, L = Dia Of Bolt Hole,
No = Number of Holes, Size = Size of Bolts

DN

K

L

No

Size

mm

mm

mm

-

mm

10

60

14

4

M12

15

65

14

4

M12

20

75

14

4

M12

25

85

14

4

M12

32

100

18

4

M16

40

110

18

4

M16

50

125

18

4

M16

65

145

18

8

M16

80

160

18

8

M16

100

190

22

8

M20

125

220

26

8

M24

150

250

26

8

M24

200

310

26

12

M24

250

370

30

12

M27

300

430

30

16

M27

350

490

33

16

M30

400

550

36

16

M33

450

600

36

20

M33

500

660

36

20

M33

600

770

39

20

M36

700

875

42

24

M39

800

990

48

24

M45

900

1090

48

28

M45

1000

1210

56

28

M52

1200

1420

56

32

M52

1400

1640

62

36

M56

1600

1860

62

40

M56

DN

K

L

No

Size

BS4504 PN 40 Dimensions

Note: Now obsolete and replaced by BS EN 1092-1 see flange index page
Stainless Steel Flanges

DN = Nominal size, D = Outside Diameter, A = Outside Dia of Neck , B1 = Bore of Type 101 & 112 Flange, C1 = Thickness of Plate Flange,
C2 = Thickness of Weld_Neck and Boss Flange, N1 = Dia of Weld Neck, N2 = Dia of Boss, R = corner Radius, H1 = Length of Boss Flange,
H2 = Length of Weld Neck Flange, H3 = Length of Neck :

Note: The flanges shown are only a small part of the range covered in BS 4504.

The Facings shown are type B (Raised Face).  Other Facings include:
Type A..Flat:  Type C..Tongue:   Type D..Groove   Type E..Spigot:  :Type F..Recess:   Type G..O-ring Recess:  Type H.,0-ring Groove:

Note : All Dimensions in mm

DN

D

C1

C2

H1

H2

H3

R

A

N1

N2

B1

d1

f1

10

90

14

16

22

35

6

3

17,2

28

30

18

40

2

15

95

14

16

22

38

6

3

21,3

32

35

22

45

2

20

105

16

18

26

40

6

4

26,9

40

45

27,5

58

2

25

115

16

18

28

40

6

4

33,7

46

52

34,5

68

2

32

140

18

18

30

42

6

5

42,4

56

60

43,5

78

2

40

150

18

18

32

45

7

5

48,3

64

70

49,5

88

3

50

165

20

20

34

48

8

5

60,3

74

84

61,5

102

3

65

185

22

22

38

52

10

6

76,1

92

104

77,5

122

3

80

200

24

24

40

58

12

6

88,9

110

118

90,5

138

3

100

235

26

24

44

65

12

6

114,3

134

145

116

162

3

125

270

28

26

48

68

12

6

139,7

162

170

141,5

188

3

150

300

30

28

52

75

12

8

168,3

190

200

170,5

218

3

200

375

36

34

52

88

16

8

219,1

244

260

221,5

285

3

250

450

42

38

60

105

18

10

273

306

312

276,5

345

3

300

515

48

42

67

115

18

10

323,9

362

380

327,5

410

4

350

580

54

46

72

125

20

10

355,6

408

424

359,5

465

4

400

660

60

50

78

135

20

10

406,4

462

478

411,0

535

4

450

685

66

50

84

135

20

12

457,0

500

522

462,0

560

4

500

755

72

52

90

140

20

12

508,0

562

576

513,5

615

4

600

890

84

60

100

150

20

12

610,0

666

686

616,5

735

5

DN

D

C1

C2

H1

H2

H3

R

A

N1

N2

B1

d1

f1

Flange Bolting

K = Bolt Circle Diameter, L = Dia Of Bolt Hole,
No = Number of Holes, Size = Size of Bolts

DN

K

L

No

Size

mm

mm

mm

-

mm

10

60

14

4

M12

15

65

14

4

M12

20

75

14

4

M12

25

85

14

4

M12

32

100

18

4

M16

40

110

18

4

M16

50

125

18

4

M16

65

145

18

8

M16

80

160

18

8

M16

100

190

22

8

M20

125

220

26

8

M24

150

250

26

8

M24

200

320

30

12

M27

250

385

33

12

M30

300

450

33

16

M30

350

510

36

16

M33

400

585

39

16

M36

450

610

39

20

M36

500

670

42

20

M39

600

795

48

20

M45


| Top |



1.
PHASELLUS PORTA FUSCE SU
Donec accumsan malesuada orci. Donec sit amet eros. Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Mauris fermentum dictum magna. Sed scelerisque eget, malesuada at, neque. Vivamus eget primis in faucibus orci luctus et ultrices posuere cubilia Curae; Suspendisse sollicit.
2.
DUIS MATTIS MI QUIS EROS
Curabitur elit leo, posuere sit amet sem sollicitudin, ipsum eu pretium. Nullam ullamcorper nec nunc in consectetur. Vivamus sollicitudin, ipsum ac tincidunt vulputate urna, quis tincidunt urna molestie sed. Nam quam et, volutpat venenatis tellus. Fusce elementum maximus erat, a dictum ligula.
3.
MI QUIS EROS DAPIBUS, UT
Pellentesque eu metus accumsan, pulvinar mi id, varius lacus. Curabitur elit leo, posuere sit amet sem sollicitudin, ultricies imperdiet ipsum. Cras placerat vulputate ipsum eu pretium. Nullam ullamcorper nec scelerisque magna, nec ullamcorper odio risus id ante. Fusce eleifend vulputate.

Laboratory products descriptions.

Click here